Installation of Inflatable Tent :

1. Inflatable tent should be placed on a flat ground before inflating. It would be much better if put a cushion under it such as carpets, plastic color cloth.
2. Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
3. When the blower switched on, inflatable tent will be inflated within 5-10 minutes.
4. If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent.

Installation of Blower:

1. Check the voltage before use it and whether the blower revolves in a right direction.
2. There should be an earth wire and regular inspection. Protection net should be put on the air inlet of blower to avoid accidents.

Cleaning and Storage:

1. Cut off the power, separate the blower and inflatable tent and open air outlet. It usually takes 10-15 minutes to let air out. The extra air must be squeezed out. If the device is watered, please dry it.
2. Do cleaning, use detergent to clean the stain, wipe away the grease, and cleaned with water, then dry it. Usually it can be cleaned by wet rags.
3. If do not use it for a long time, clean and pack it well. The best temperature to store is -50 ~ +40 degrees Celsius.
4. Blower should stay away from wet and corrosion. Inflatable tent should be protected from insects biting.

Maintenance

1. Clean the damage.
2. Pick up a piece of material from repair kit and cut 3 times as the damage in a circle shape.
3. Put some glue both on the damage and repair material.
4. Dry the glue totally and naturally (about 5 minutes). Then put them together and press them. The inflatable tent can be used again a few hours later.
5. If there is a large-scale non-normal damage, factory can provide professional maintenance services or return to the factory directly for maintenance.